Clothes; Ecology; Safety Labels - Alpego DJ serie Betriebs- Und Wartungsanleitung

MANUALE ERPICI PIEGHEVOLI DJ-DP-DK-DMAX
3.3. TRANSPORT ON PUBLIC ROADS
If necessary, the machine can be transported on the roads while hitched to the tractor. The operator must check, compare and
adapt the implement so that it fully complies with the Highway Code in force in the country of use.
Bear in mind the following recommendations:
 Comply with the instructions in this manual when you hitch the machine to the tractor;
 The machine must remain blocked and raised from the ground during transport.
 You must take all possible precautions and comply with the pertinent laws in order to safeguard yourselves
and others.

Projecting parts and those beyond the width of the tractor must be fitted with the relative protections.

The entire implement must be equipped with its own lighting system complete with flashing lights and indicators.

Warning boards to indicate the projecting parts of the implement must be affixed where necessary.

 The braking distance and steering capacity of the tractor are influenced by the weight of the machine hitched to its power lift.
 When driving round bends, take great care and allow for the action of the centrifugal force that shifts the machine's center of
gravity.
Comply with the load limits on the axles.

Bear in mind the limits imposed by the overhang and projection from the sides of the tractor.


3.4. CLOTHES

Always wear safety gear and clothes. Make sure no dangling parts are present as they may get caught in moving parts.
For the same reasons please always remove watches, rings, necklaces, wristbands etc. Long hair may be a danger as well,
please keep them tied.
If it is Always wear safety gear as required by your local authorities
(safety shoes, gloves, earplugs, masks, etc.)

3.5. ECOLOGY

Comply with the regulations of your own country concerning the use and the disposal of the products which are used for
lubricating, maintaining and cleaning the machine ; strictly comply with the instructions listed in the packages of the products.
Comply with the laws in force also in case the machine is scraped.

3.6. SAFETY LABELS

The various adhesive labels on the machine serve to signal the presence of a danger, observe them carefully and follow the
indications for the safe use of the machine; they must be kept clean and readable and, if damaged, they have to be replaced.
FIGURE
Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa
CODE
Before using the equipment it is compulsory to
read the user and maintenance booklet and the
D02612
suggestions about safety as well as to observe
all the instructions during the use.
It Indicates the connection point for the
D02627
transportation and the sheltering of the
machine.
It Indicates the shearing period during the
D02613
working movements of the machine
It Indicates the danger to project stones during
D02618
the working operations and suggests to stay at
a proper distance from the machine.
It indicates the danger of the teeth rotation
D02620
during the working operation and suggests to
stay at a proper distance from the machine.
Old Cod.D03214
Q00A00017 R.23
INDICATIONS
SAFETY RULES
- 12