Product Description And Intended Use - Stryker SERFAS Bedienungs- Und Wartungsanleitung

Product Description and
Intended Use
The Stryker SERFAS Energy System is a bipolar, radio-frequency (RF)
electrosurgical system designed to deliver a high frequency output for use in
arthroscopic and orthopedic procedures. The SERFAS Energy System consists of
three main components:
1. The SERFAS Energy Generator
2. The disposable, single-use SERFAS Energy Probe
3. The SERFAS Energy Footswitch
The SERFAS Energy Generator
The SERFAS Energy Generator is the radio-frequency energy delivering unit,
designed to deliver a high-frequency output to the treatment site to perform
electrosurgical procedures. The front console panel features controls for
adjusting the CUT mode power outputs and provides visual cues for CUT power
levels, CUT and COAG activation, connection of Probe and Footswitch, and error
code warnings.
The rear console panel provides ports for connecting the SERFAS Energy
Generator to other Stryker equipment, including Sidne™ and future Stryker
firewire compatible devices.
The features of the front and rear console panels are listed in Figures 1a and 1b.
2
3
4
1
Figure 1a: The SERFAS Energy Generator, front panel
1. Power Switch: Powers the Generator on and off
2. Error Indicator: A red indicator will illuminate to indicate an error. (See
error code on Cut Set Point Display Window for determining type of
error)
3. Coagulation Activation Indicator: A blue indicator will illuminate when
RF energy is delivered due to the COAG pedal/button being pressed
16
5
9
8
6
7 10