Possible Adverse Effects; Storage; Product Description And Use; Main Arm (Hh1001) - Stryker SPY-PHI Bedienungsanleitung

7. To maintain intended clamping capacity of the table rail
clamp, do not tighten the table rail clamping knob when
the main arm column is not fully installed.
8. The Rail Clamps are not insulated. If grounding of patient
is NOT ACCEPTABLE, DO NOT use the system.
9. DO NOT FORCE BLACK KNOB OF THE MAIN ARM
PAST STOP WHEN OPENING/LOOSENING.

6. Possible Adverse Effects

Delayed surgical procedure.

7. Storage

Components should be stored in a clean and dry area.
each component prior to use for functionality and damage.
When necessary, dispose of products in accordance with
national regulations and approved hospital practices for
surgical component disposal.

8. Product Description and Use

8.1 Main Arm (HH1001)

Provides three-point positioning of the
imaging head into the surgical field. The
articulating segments of the Main Arm are
connected to a rigid column.
To position and lock in place:
1. Hold the distal end with one hand
and loosen the central knob by
turning it counterclockwise.
2. Position the imaging head as needed
and turn the knob clockwise to lock in
place. Check to see that the Main
Arm is secure enough to hold its
position.

8.2 Table Clamp (HH1002)

Provides an attachment point to the operating table side rail.
Accepts and holds the column of the main arm in position
and allows for full range of rotation.
©2020 IFU-0100 / rev3
Inspect
7