Stryker SERFAS Bedienungs- Und Wartungsanleitung Seite 21

The SERFAS Energy Footswitch
The SERFAS Energy Footswitch is an optional system feature that can be used to
activate the SERFAS Energy Probes in both the CUT and COAG modes as well as
to increase or decrease the CUT output level settings.
Figure 3 below lists the features of the Footswitch:
1
5
Figure 3: The SERFAS Energy Footswitch
1. Yellow Cut Pedal: Used for activation of CUT function
2. Blue Coag Pedal: Used for activation of COAG function
3. Minus (-) Pedal: Used to adjust CUT level down
4. Plus (+) Pedal: Used to adjust CUT level up
5. Footswitch Connector: Connects to front panel of SERFAS Energy
Generator
Note Stryker considers instructional training, or in-service, as an
integral part of the SERFAS Energy System. Your local Stryker
sales representative will perform at least one in-service at your
convenience to help set up your equipment and instruct you and
your staff on its operation and maintenance. To schedule an in-
service, contact your local Stryker representative after your
equipment has arrived.
Note Use only the appropriate SERFAS Energy accessories with the
SERFAS Energy Generator.
3
4
2
19