Selecting Audio Input Jacks (Audio Select); Selecting The Multi-Channel Input Component; Selecting The Hdmi Out Jack - Yamaha RX-V3900 Bedienungsanleitung

Selecting audio input jacks
(AUDIO SELECT)
Use this feature (audio input jack select) to switch the
input jack assigned to an input source when more than one
jacks are assigned to an input source.
Rotate the C INPUT selector (or press one
1
of the input selector buttons (3)) to select
the desired input source.
Press D AUDIO SELECT and then rotate
2
M PROGRAM selector (or set the operation
mode to FAMP and then press FAUDIO
SEL repeatedly) to select the desired audio
input jack select setting.
Available input sources
DOCK V-AUX VCR DVR CBL/SAT DVD
USB
NET
A . S E L :
AUTO
Automatically selects input signals in the
following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI
Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
COAX/OPT
Automatically selects input signals in the
following order:
(1) Digital signals input at the COAXIAL jack.
(2) Digital signals input at the OPTICAL jack.
When no signals are input, no sound is output.
ANALOG
Selects only analog signals. If no analog
signals are input, no sound is output.
y
You can configure the default audio input jack select setting
with "Audio Select" (page 74).
Note
This feature is not available if no digital input jack is assigned
to the selected input source in "I/O Assignment" (page 86).
"HDMI" is available only when an HDMI input jack is
assigned.
BD/HD DVD MD/CD-R TV CD PHONO MULTI CH TUNER
A U T O
Selected audio input jack
select setting
Selecting the multi-channel input
component
Use this feature to select the component connected to the
MULTI CH INPUT jacks (page 22) as the input source.
Rotate the C INPUT selector on the front panel
to select "MULTI CH" (or press 3 MULTI).
y
You can configure the multi channel input settings with
"MULTI CH" (page 74).
Note
Sound field programs cannot be selected when "MULTI CH" is
selected as the input source.

Selecting the HDMI OUT jack

Use this feature to select the HDMI OUT jack(s) to output
the input signals.
Set the operation mode selector to F AMP and
then press RHDMI OUT on the remote control
repeatedly to select the desired setting.
The HDMI output setting changes as follows.
OUT1+2
OFF
OUT 1+2
Outputs the signals at both the HDMI OUT 1
and HDMI OUT 2 jacks simultaneously.
OUT 1
Outputs the signals at the HDMI OUT 1 jack.
OUT 2
Outputs the signals at the HDMI OUT 2 jack.
OFF
Does not output any signals at the HDMI OUT
1 and HDMI OUT 2 jacks. Select this setting
when you do not use the video monitor
connected to one of the HDMI OUT jacks.
y
You can select the HDMI OUT jack at which HDMI control
signals are output with "Control Monitor" (page 83).
Playback
OUT1
OUT2
37
En