Putting Into Operation - Abicor Binzel TCS-Compact Betriebsanleitung

TCS-Compact

6 Putting into operation

Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance, servicing, assembly,
disassembly, and repair work:
• Disconnect the power supply.
• Interrupt the compressed air supply.
NOTICE
• Please take note of the following instructions:
• The system may only be installed and put into operation by qualified personnel (in Germany, see
1 Injection hose connector
2
Suction air volume adjuster
3 Connection between the anti-spatter fluid
and the injection unit
4
Return hose
Fig. 7 Putting into operation
To put the welding torch injection unit into operation, the two hoses (4) and (10) have to be connected to
the applicable bottles. All other compressed air connections are mounted in the factory.
DANGER
3 Product description on page EN-7
TRBS 1203).
10
9
8
7
6
5 Return flow bottle
6
Non-return valve
7 Anti-spatter fluid bottle (full)
6 Putting into operation
1
2
3
4
5
8 Maintenance unit
9
Compressed air connection (mounted)
10 Suction connection (mounted)