Abicor Binzel TCS-Compact Betriebsanleitung Seite 59

TCS-Compact
6.3.3 Securing the clamping prism
5
1
Clamping prism
ø
2 Gas nozzle marking
Fig. 15 Securing the clamping prism
1 Insert the clamping prism (1) into the clamping device (5) from above.
NOTICE
• Ensure that the attached clamping prism (1) is compatible with the gas nozzle diameter. The clamping
2 Use a cylinder head screw (M8x20) (3) to secure the clamping prism (tightening torque 20 Nm).
1
3
M8x20 cylinder head screw
4 AF6 Allen key
prism is labeled with its own diameter.
Fig. 15 Securing the clamping prism on page EN-23, pos. (2)
6 Putting into operation
2
3
4
5
Gas nozzle clamping device