Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TCS-Compact
6.2 Electrical connection
The torch cleaning station is connected to the power supply via an integrated plug-in connection. The
necessary control signals are also transmitted via this plug.
Fig. 9
Electrical connection
NOTICE
• Ready-to-use control leads are available in lengths of 5m and 10m (optional).
• For electrical connection note if the device uses transistor-output: high-side switch (PNP/sourcing) or
transistor-output: low-side switch (NPN/sinking).
13.1 Circuit diagram on page EN-33
6 Putting into operation
Operating
1/A PE
voltage
2/B
0V
3/C
24 VDC/200 mA (com)
Input
4/D Clamp/
cutter on (Y3) 0V/2,8W
5/E Stroke up (Y1) 0V/2,8W
6/F Motor rotation (Y2) 0V/2,8W
Output
7/G Stroke down (S1) 0V/max.100mA
8/H Clamping cylinder
open (S2) 0V/max.100mA
Werbung
Inhaltsverzeichnis
Fehlerbehebung
