MK AV Handbuch Seite 63

mk-messtechnik
the help of a FSMA-optical cable. Before turning on the receiver, the
volume should be turned down. A suitable monitor with video IN
should be connected to the video OUT of the receiver.
About 10 seconds after turning on the device, it is ready for use.
Do not press any buttons at the remote control in this time!
Caution: The display must be disconnected in case of susceptibility
tests since it is not designed for high field strengths. In addition, the
operating time of the camera increases when the display is
disconnected.
An optimized version of the camera for emission tests is available on
request. The AV-C-SA camera has no restrictions at immunity tests
and uses a 12 V-battery.
AV-C(r)
English
The display must be
disconnected in case of
susceptibility tests.
E-IV-3