Gamma Menu - Mk Av Handbuch

mk-messtechnik
n o p q r s t u v w x y z
: ; ' " . , < > ( ) [ ] { }
U P
③
D O W N
This is used to set up the ID figures & position on the screen (title setting).
TITLE start position selector.
TITLE Character selector.
TITLE display position "UP" or "DOWN" selector.
Having adjusted the settings (and confirmed with [Enter]), push [Esc] to go back to the
main menu page.
[10]. PRESET SELECT MENU
→ P R E S E T
①
→ O F F
O N
I N I T I A L
②
O F F
→ O N
P H A S E
③
→ O F F
O N
- - - - - - - - - ■ - - - - - - -
④
This is used to make the camera go back to the "PRESET", "INITIAL", or "PHASE"
condition.
① PRESET": Set to "ON", camera will be reset and set to default data.
"INITIAL": Set to "ON", the lens is active; set to "OFF" the lens is inactive.
"PHASE": Set to "OFF" the ext-sync is disabled, set to "ON" the ext-VD sync is enabled
(EXT-VD signal must be present).
"PHASE" set to "ON" activates sync-phase adjustment.
Having adjusted the settings (and confirmed with [Enter]), push [Esc] to go back to the
main menu page.
The following menu can be entered when pushing the [Down] key in the "PRESET"
position.
[11]. MARK MENU
M A R K
①
→ O F F
O N
This is used to set the cross line display as "ON" / "OFF".
"MARK": Cross line "ON"/"OFF" select. Set "ON" to display cross line, set "OFF" to hide
cross line.

[12]. GAMMA MENU

G A M M A
①
→ T Y P E A
T Y P E B
This is used to select the gamma correction of the camera.
"GAMMA": When "TYPE-A" is set, gamma is 0.45, if "TYPE-B" is set, gamma is 1.0
[13]. POWER ON MENU
Camera Menu
- * /
+
Deutsch / English
IX-5