ECOLAB DOS ECO Kurz- Betriebsanleitung Seite 71

General information
1.3.2.1 Unpacking the dosing station
NOTICE!
Improper opening of the packaging can damage the machine.
Proceed as follows to unpack the machine:
1. Remove the top and front panels and then the side panels.
2. Remove the accessory boxes, the manual, and all items except the dosing station.
3. Remove the plastic wrapping if necessary.
4. Loosen the screws securing the wood transport blocks to the underside of the frame.
Immediately after unpacking the dosing station, check that it is complete
and has not been damaged during transport.
Proceed with visible damage as follows:
n Do not accept the delivery or only temporarily.
n Make a note of the extent of the damage on the transport documents or the Delivery
note.
n Submit a complaint.
Make claims for damages, as soon as you have them discover.
Claims for damages can only be asserted during the corresponding period
must be submitted.
1.3.3 Packaging
The individual packages are packaged to reflect the expected transport conditions.
Only environmentally-friendly materials were used for the packaging. The packaging is
designed to protect the individual components up to assembly against shipping damage,
corrosion and other damage.
Do not destroy the packaging and only remove it just before assembly.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal.
Packaging materials are valuable raw materials and can, in many cases, be
used again or be usefully processed and recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
– Observe the locally applicable disposal regulations.
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.
417101656 Rev. 01-10.2019 10