Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.
Use the scrollbar to set the time/minutes.
10. Press the Next
ð Screen change for setting: 'Pulse duty factor'
11. Use the scrollbar to set the minutes.
12. Select seconds.
13. Use the scrollbar to set the seconds.
14. Press the Next
ð Screen change for setting: 'Capacity'
15.
'Set the decimal places of the capacity in litres' using the scroll bar.
16. Select the field for entering the value after the decimal point.
ð The colour changes to dark blue, which indicates that the field is ready for input.
17.
'Set decimal places of the capacity in litres' using the scrollbar.
18. Press the Next
ð Screen change for setting: 'day of the week'
19.
'Select' days of the week.
ð A check mark is set in the selection field.
20. Press the
button.
ð The pump saves the settings and switches back to the previous screen.
21. Go to [Main menu] by pressing the button
Set [Operating mode] [Timer] [Interval programme]:
1.
Open the main menu.
2.
- [Timer] [Interval programme] .
3.
Press the Next
ð Screen change to the selection of the timer interval (interval programme)
4.
[Interval programme] .
ð Screen change for setting: 'Interval programme' - 'Switch-on duration'
5.
Use the scrollbar to set the time/hours.
6.
Select time / minutes.
7.
Use the scrollbar to set the time/minutes.
8.
Press the Next
ð Screen change for setting: 'Switch-off duration'
9.
Use the scrollbar to set the minutes.
10. Select seconds.
11. Use the scrollbar to set the seconds.
12. Press the Next
ð Screen change for setting: 'start state'
13. If required, select 'Start condition OFF' .
ð A check mark is set in the selection field.
14. Press the Next
ð Screen change for setting: 'Capacity'
15. Set the litres with the scrollbar.
16. Select the millilitre range.
button.
button.
button.
button.
button.
button.
button.
49
Comissioning and operation
.
417101656 Rev. 01-10.2019
Werbung
Inhaltsverzeichnis
