Manual Oven Control Board - OEM MILLENIUM VALIDO Bedienungs- Und Wartungshandbuch

MILLENIUM VALIDO
Functioning
5.2 - MANUAL OVEN CONTROL BOARD (Fig 12)
On the oven, there are the following control elements:
1. Line key ON/OFF
Pressing it, the display (2) lights up and the control
elements are energized.
2. Display
The set & real temperatures are displayed.
3. Light button
Press the button to turn on the internal oven light.
Press the button again to turn off the light.
4. Adjustment hand grip for bedplate resistance
capacity
By rotating the hand grip (4) clockwise, the bedplate
resistance percentage capacity is increased, coun-
terclockwise it is reduced.
5. Adjustment hand grip for ceiling resistance ca-
pacity
By rotating the hand grip (5) clockwise, the ceil-
ing resistance percentage capacity is increased,
counterclockwise it is reduced.
7
1
FIG. 12
6
2
5
4
3
6. Increment key
To increase the temperature value.
7. Decrement key
To reduce the temperature value.
3. Light button
Press the button to turn on the internal oven light.
Press the button again to turn off the light.
Temperature setting
The actual oven temperature is shown on the display
(2). To change the set temperature, press the
, button (the set temperature will be shown on the
display), then within 5 seconds press the
to increase or the button to decrease it. After ap-
proximately 10 seconds from the temperature setting,
a temperature self-entering occurs and the real oven
temperature is displayed.
and
button
EN - 25