Mechanical Oven Control Panel - OEM START Gebrauchs- Und Instandhaltungshandbuch

START
Functioning
Capitolo 5

5.1 - MECHANICAL OVEN CONTROL PANEL

(Fig. 1)
On the oven, there are the following control elements:
1. Line button switch ON/OFF
If you press it onto ON, it energizes the control ele-
ments and the lamp being inside the oven light up.
2. Bedplate temperature adjustment thermostat
Turn the rotary knob and position it onto the bedplate
temperature you wish, to do it, please refer to the
graduated scale.
3. Bedplate resistance lamp
Lights up when the bedplate resistances are on, it
goes out when the oven reaches the set temperature.
4. Crown plate temperature adjustment thermostat
Turn the rotary knob and position it onto the crown
plate temperature you wish, to do it, please refer to
the graduated scale.
5. Crown plate resistance lamp
Lights up when the bedplate resistances are on, it
goes out when the oven reaches the set temperature.
6. Analogue pyrometer
Indicates the actual oven temperature.
FIG. 1
EN - 15