Malfuctioning,Cause And Cure; Safety Thermostat Recharge - OEM MILLENIUM VALIDO Bedienungs- Und Wartungshandbuch

5.5 -

MALFUCTIONING,CAUSE AND CURE

- The oven does not start:
• Verify the electric connection.
• Make sure the cutout switch is on.
• Contact manufacturerʼs technical service.
- Pizza is not baked, uniformly:
• The baking surface is dirt: clean the baking surface
• The baking surface is damaged: replace the surface
• Adjust the oven temperature
• Check the hood extraction
- Oven malfunctioning:
• The set temperature is not reached:
Reistances are damaged
Make sure the electric oven connection has properly
been carried out
Contact manufacturerʼs technical service.
DANGER
For all other troubles, do not hesitate to
contact manufacturerʼs technical service
5.6 - SAFETY THERMOSTAT RECHARGE (Fig 16)
DANGER
This operation shall be carried out by manu-
facturerʼs technical service after eliminating
the trouble.
The safety thermostat recharge shall manually be carried
out as follows:
DANGER
Disconnect the knife switch placed in the
upper machine side, eliminate the cause of
the thermostat intervention.
Remove the right-hand panel (1).
Press the red push-button (2) on the safety thermostat,
then reassemble all by proceeding in the opposite way.
EN - 30
MILLENIUM VALIDO
Functioning
FIG. 16
2
1