Symbols Used In Manual; Glossary - OEM TL45 Gebrauchsanweisung Und Warnhinweise

The qualifications shown in the table on this page are obligatory within a category of people defined as "trained
person".
TYPE
Trained Person

2.6. Symbols used in manual

SYMBOL

2.7. Glossary

In manuals you can find a technical terminology or with an unusual meaning.
The following explains the used terms and abbreviations:
TERM
Lifting accessories
ATEX
Failure
Chains, ropes or straps
CHAPTER 2 – PRELIMINARY INFORMATION
DEFINITION
The one who has been informed, instructed and trained at work and any dangers
arising from misuse. He also knows the importance of safety devices, safety
standards and safe working conditions.
DEFINITION
Symbol used to identify warnings that are important for the safety of the operator
and/or machine.
Symbol used to identify information of particular importance in the manual. The
information also relates to the safety of personnel involved in the use of the
machine.
Symbol used to indicate a general prohibition.
Symbol used to indicate the obligation to read instructions for use and maintenance
before using the device.
DEFINITION
Components or equipment not connected to the machines that allow, located
between the machine and the load or on the load itself, the grasp of the load. The
harnesses and their components are also considered lifting accessories.
It derives from the words ATmosphères and EXplosibles and it is the conventional
name that groups two directives of the European Union (EU):
2014/34/EU for the regulation of the equipment used in explosion risk
•
areas;
99/92/CE for the safety and health of the workers in explosive
•
atmospheres or in explosion risk environments.
A general failure that prevents the normal operation of a machine, a plant, etc.
Elements designed and built for lifting purposes as an integral part of lifting
machines or lifting accessories.
PIZZA OVEN mod. TL
Page 95