Troubleshooting - Stryker 2870 Bedienungs-/Wartungshandbuch

Problem
Loss of power
Low pressure alarm noises
Patient is bottoming out
Air cells fail to inflate
www.stryker.com

Troubleshooting

Solution
Check if the plug is connected to mains.
1. Check if the CPR is sealed.
2. Check if the mattress air cell is broken.
3. Check if the connection tube is tightly secured.
Pressure setting might be inadequate for the patient. Adjust comfort range
1 to 2 levels higher and wait for a few minutes for best comfort.
Make sure the air hose is not kinked, cracked, or split. Verify that the power
switch is illuminated, signifying the control unit has power. Verify that the
air hoses are fully inserted with a positive connection.
836001-5210 V2.5
Return To Table of Contents
15