Removing The Outlet Board - Hitachi DV-P250E Bedienungsanleitung

3. To remove the kitting part, remove the four screws from the top of the DVD-ROM drive.
4. Remove the four screws of the DVD-ROM drive to detach the DVD-ROM shield and the two EMI shields
from the bottom of the DVD-ROM drive.
.

Removing the Outlet Board

1. Disconnect the two cables and remove the four screws from the outlet board.
2. Then, remove the eight screws from the rear panel of the machine.
.
3. Lift the outlet board away.
Chapter 2 33