English - AtriCure COBRA Fusion Gebrauchsanweisung

1-513-755-4100 (phone)

ENGLISH

Instructions for Use
Carefully read all instructions prior to use. Observe all contraindications, warnings and precautions noted in these directions. Failure to
do so may result in patient complications.
ESTECH relies on the physician to determine, assess, and communicate to each patient all foreseeable risks of the procedure.
System Description:
The Cobra Fusion™ System is comprised of four main components: the COBRA Fusion 50 or 150 Ablation
System, the Magnetic Retriever System, and the Pacing/Recording Adapter Cable.
Left to Right: (1) COBRA Fusion ablation probe, (2) Magnetic Introducer, (3) Magnetic Retriever, (4) Magnetic Positioner, (5) Magnetic
Swivel Positioner, (6) Accessory Temporary External Pacemaker Connecting Cable
The COBRA Fusion ablation Probe includes an integrated suction stabilizer designed to engage tissue
under vacuum such that constant contact between Probe electrodes and tissue to be ablated is maintained
throughout the procedure. The Introducer and Retriever System are designed to facilitate introduction and
advancement of the Probe to the desired anatomical position. The accessory cable allows the Probe to be
connected to a temporary pacing/recording device.
430-15106-02_Rev J
Figure 1. Cobra Fusion Ablation System
FAX: +32 (0) 2 375 89 06
e-mail: herbert.kontges@skynet.be
Page 2 of 88