Transport And Handling; Packaging - Faema Emblema Gebrauch Und Installation

Installation, dismantling, and adjustments must only be performed by quali ed and
authorized technicians.
Carefully read the warnings and rules in this manual because they provide important
information regarding safe installation, use and maintenance of the machine.
Keep this booklet handy for easy reference.

2.1 Transport and handling

Packaging

• The machine is delivered in a robust cardboard package, with appropriate internal protection. The
package features the standard symbols indicating rules to be followed when handling and storing
the machine.
• Transport must be carried out according to the instructions on the package, handling with
appropriate caution and avoiding impact of any type.
• Do not expose the machine to atmospheric agents (rain, sun, and cold).
Checks on receipt
• On receipt of the machine, carefully check all transport documentation is correct (against label
on package).
• After removing the machine from its packing materials, make sure that the machine and its safety
devices are intact.
• Packing materials (plastic bags, polystyrene foam, staples, etc.) must be kept out of the reach of
children because they are potentially hazardous.
Advice for disposal of packaging
The packaging materials are eco-compatible and recyclable. For the protection of the
environment they must not be dumped, but taken to a recovery / waste-disposal centre,
according to local regulations.
Handling
Staff responsible for moving the machine must realize the risks in moving heavy loads.
Move the machine carefully, using,
where possible, the correct lifting
equipment (fork lift, for example).
If moving the machine by hand, make
sure:
- enough people are available for
the task, depending on the machine
weight and dif cult handling;
- to always use the necessary safety
gear (shoes/gloves).
WARNING
OK
3 EN
NO
OK