Description Display Symbols - Faema Emblema Gebrauch Und Installation

This symbol indicates the boiler water level.
During the loading phase, the dark bottom part
of the icon blinks.
When the optimum level is reached, the symbol
looks like this:
This symbol (dark inside) indicates that the
resistance is activated and functioning.
When the boiler pressure reaches the set value, the icon
looks like this
When the machine is in operation, the two icons
alternate on the display, indicating the presence of the
electric heating.
Note: the customer cannot switch on or switch off the
electric heating.
When the on/off function is programmed, the electric heating
takes place automatically.
This indicates that the heating resistance has
been disabled.
This symbol indicates the boiler pressure value.

Description display symbols

(light inside).
This symbol indicates that the machine is pre-heating
or the boiler pressure has dropped below 0.5 bar.
This also indicates the boiler heating situation,
meaning that it appears if one or more boilers are
still in the rst heating phase or if their temperature
has fallen below 55°C.
If one of the STOP/continuous coffee"
is pressed, coffee will be served at the temperature
reached at that moment.
All of the other keys are disabled because the working
pressure has not been reached.
While waiting for the machine to be ready for use,
insert the lter holders in the units.
The machine has reached the set work pressure and
temperature when the icon
display.
Press a coffee selection key for each keypad to adjust the
temperature between the group and lter holder.
This symbol indicates that the technical
programming menu can be accessed.
11 EN
keys
disappears from the