Caution; Maintenance And Repairs - Faema ME 64 Gebrauch Und Installation

9. Caution

GENERAL
The manufacturer declines all responsibility for damages
to persons or things due to improper use.
Never use the appliance with wet hands or bare feet.
Ensure that the appliance is not used by children or persons
who have not been instructed in its correct use.
THERMAL PROTECTOR
The thermal protector cuts in if the motor gets overheated due
to malfunction.
Allow the appliance to cool down before switching it on
again.
If the problem is repeated, call the authorized servicing
department.

10. Maintenance and Repairs

If the machine is not working properly, turn off the appliance,
turn off the main off-on switch, and call the service center.
WARNING: Maintenance by unqualified people
can jeopardize the safety and conformity of the
appliance.
Only use qualified, authorized technicians for
repairs.
Only use original spare parts guaranteed by the
manufacturer.
If original spare parts are not used, the manufac-
turer warranty will no longer be valid.
WARNING
COFFEE STORAGE
Always use fresh coffee beans and store in jars or waterproof,
sealed bags. Keep away from light sources and store in a
cool, dry place.
Try to use up all the coffee in the doser at the end of the working
day since it can lose its aroma and spoil.
MACHINE CLOSE-DOWN
When the machine remains unattended for
a long period of time (at night, during the
weekly closing day or during holidays) the
following operations shall be performed:
- Remove the plug or switch off the main
switch.
- Empty the coffee beans receptacle and
the ground coffee doser.
Non-compliance with these safety measures
exonerates the manufacturer from all liability
for malfunctions or damage to persons or
items.
If the power supply cord is damaged, switch off the appliance
and request a replacement from the service center.
To ensure safety during operation, it is
absolutely necessary to:
- f o l l o w a l l t h e m a n u f a c t u r e r ' s
instructions;
- have qualified and authorized technicians
periodically check that all safety devices
are intact and functioning properly (the
first inspection within three years of
purchase and every year after that).
21