Transport And Handling - Faema Barcode New Touch Gebrauch Und Installation

authorized technicians.
Carefully read the warnings and rules in this manual because they provide important
information regarding safe installation, use and maintenance of the machine.
Keep this booklet handy for easy reference.

2.1 Transport and handling

Packaging
• The machine is delivered in a robust cardboard package, with appropriate internal protection. The
package features the standard symbols indicating rules to be followed when handling and storing
the machine.
• Transport must be carried out according to the instructions on the package, handling with
appropriate caution and avoiding impact of any type.
• Do not expose the machine to atmospheric agents (rain, sun, and cold).
Checks on receipt
• On receipt of the machine, carefully check all transport documentation is correct (against label
on package).
• Check that the original packaging is not damaged.
• After removing the machine from its packing materials, make sure that the machine and its safety
devices are intact.
• Packing materials (plastic bags, polystyrene foam, staples, etc.) must be kept out of the reach of
children because they are potentially hazardous.
Advice for disposal of packaging
The packaging materials are eco-compatible and recyclable. For the protection of the
environment they must not be dumped, but taken to a recovery / waste-disposal centre,
according to local regulations.
Handling
Staff responsible for moving the machine must realize the risks in moving heavy loads.
Move the machine carefully, using, where possible, the correct lifting equipment (fork lift, for
example).
If moving the machine by hand, make sure:
handling;
- to always use the necessary safety gear (shoes/gloves).
WARNING
3 EN