Service Time Menu; Date And Time - Faema Emblema Gebrauch Und Installation

Service time menu

Pressing the "PRG" (29), the following message will
appear on the display:
SERVICE TIME

DATE AND TIME

The following service time parameters can be modi ed:
ON time (time the machine switches on);
-
OFF time (time the machine switches off);
-
day off (day on which the enterprise is closed);
-
Energy Saving (enable/disable the Energy Saving
-
function: YES/NO);
Night ON (start time for evening beverage price: only
-
when payment system is connected);
Night OFF (end time for evening beverage price: only
-
when payment system is connected);
Wash 1 (request - every 24 hrs - at the programmed
-
hour; cannot be disabled);
Wash 2 ÷ 3 (hour of scheduled washes from 2 to 5);
-
(prompt for boiler water to be changed. Can be
set by a technician to one of the following modes:
OFF: prompt for boiler water to be changed is
deactivated;
HH:MM: a time is set for the prompt message to appear.
Note: the user can change the prompt time but cannot
deactivate it, setting it to OFF.
With the prompt activated, the following message will
appear on the display, at the set time: "EXECUTE
RINSING BOILER".
The prompt remains on the display for one hour, or until
the user starts the cycle.
If the boiler water is not changed, this will not affect the
functioning of the machine; however, the technician will
be able to consult a list of requested/completed rinses
using the INFO menu.
Further instructions can be found in the paragraph
"Chan in the ater in the oiler" in this manual.
Date and time
To modify the date and hour, press the
(29) on the "Service time" line and then press again the
"PRG" key (29) on the corresponding line. The following
message will appear:
DATE AND TIME
Year
+
"PRG" key
+
13
17 EN
General indications
If there is no day off (i.e. the enterprise never closes), enter
"none" for the "day off" item.
Enter the same time for the "ON time" and "OFF time"
parameters (for example:
ON time 22:00
OFF time 22:00)
if the automatic switch on/switch off function is not required
and you wish to manually switch the machine on and off.
"WASH 1" AND "WASHES 2 ÷ 3"
Washing cycles can be performed at pre-set times. At the
set time, the display will show: this message "EXECUTE
COFFEE WASHING".
When requested, a washing cycle (simultaneous or
sequential) will be performed as described in the "Cleaning
Operations" paragraph.
Follow these steps to set the time for the washing cycle:
- Position the cursor on the line to be modi ed (WASH...);
- Press the "PRG" key (29);
- Change the time, using the
keys;
- Press the "RES" (24)
Repeat the steps previously indicated to modify the washing
times.
NOTES
Wash 1: wash 1 cannot be disabled. It is requested daily
at the programmed hour, and always within 24 hours.
Washes 2 ÷ 3 : if the set hour for these wash cycles
occurs when the machine is switched off, the request will
be canceled.
Set OFF against the time so as to not activate these wash
cycles.
OFF is displayed press the
time is "00:00".
For more details, please consult the technical manual at
the "Con guration menu - wash options" paragraph.
Use the "+" (30) and "-" (31) keys to move the cursor to
the entry to be modi ed, then press the
The cursor will turn into an arrow and it becomes possible
to change the number for the selected entry by using the
"+" (30) and "-" (31) keys.
Once the operation is completed, press the
(24) to con rm the data.
Note: the cursor changes back to .
Repeat the operation described above to modify other
parameters.
"+" (30) and "-" (31)
key to con rm the setting.
"-" (31) key the indicated
"PRG" key (29).
"RES" key