Clock Adjustment; Customer Parameters Menu; Language Selection - Faema Emblema Gebrauch Und Installation

17. Clock adjustment

Use the "+" (30) and
The time increases (or decreases) one minute each time
the key is pressed.
If one of the keys ( 30 or
for more than 10 seconds, the minutes setting stops and
the hours setting increases (or decreases).
During the time setting phase, the seconds remain at "00".

18. Customer parameters menu

To access "Customer parameters" press
following message will appear on the display:

Language selection

To display the messages in a different language from that
set, after entering into Programming mode, position the
cursor on the desired language by pressing the
and "-" (31) keys and then pressing the
(29). The machine will restart with the messages provided
in the selected language.
The display (14) provides a choice of the following
languages.:
Italian, English, French, German, Dutch, Spanish,
Portuguese, Japanese and Russian.
"-" (31) keys to adjust the clock.
31) is pressed and held down
key (34); the
"+" (30)
"PRG" key
11 October 2013
CUSTOMER PARAMETERS
SERVICE TIME
CUSTOMER PARAMETERS
ENGLISH
16 EN
+
15:40:51
+
+