Electrical Connections - Eliwell EWPlus 902 Handbuch

IDPlus 961-974 -HC
(*) The device carries out a Lamp Test when turned on; the display and ICONs flash for a few seconds, to verify
their integrity and ensure they are working properly.
(*) To activate the LOC function: - enter the "Basic Commands" menu by pressing
If the LOC function is active, on entering the "Programming Menu", the text LOC appears.
The LOC function parameters activate as read-only. To disable the keypad lock, repeat the procedure.

ELECTRICAL CONNECTIONS

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
• Disconnect all power from all equipment including connected devices prior to removing any covers or doors,
or installing or removing any accessories, hardware, cables or wires.
• Always use the correctly rated voltage sensing device to confirm the power is off where and when indicated.
• Replace and secure all covers, accessories, hardware, cables and wires.
• Verify the earthing connections on all earthed devices.
• Use only the specified voltage when operating this equipment and any associated products.
Failure to follow these instructions will result in death or serious injury.
9IS54671.00 10 - 2018
- press keys and
DANGER
set
within 2 seconds.
www.eliwell.com
.
4/40