Eliwell EWPlus 902 Handbuch Seite 5

IDPlus 961-974 - HC
POTENTIAL OF OVERHEATING AND FIRE
• Use this device only at the specified voltage.
• Do not use with loads other than those indicated in the technical specification.
• Do not exceed the maximum permitted current; for higher loads, use a meter with sufficient power
capacity.
Failure to follow these instructions will result in death or serious injury.
UNINTENDED EQUIPMENT OPERATION
• Use appropriate safety interlocks where personnel and/or equipment hazards exist.
• Install and operate this equipment in an enclosure appropriately rated for its intended environment and
secured by a keyed or tooled locking mechanism.
• Power line and output circuits must be wired and fused in compliance with local and national regulatory
requirements for the rated current and voltage of the particular equipment.
• Do not use this equipment in safety-critical machine functions unless the equipment is otherwise
designated as functional safety equipment and conforming to applicable regulations and standards.
• Do not disassemble, repair, or modify this equipment.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
9IS54671.00 10 - 2018
DANGER
WARNING
www.eliwell.com
5/40