Eliwell EWPlus 902 Handbuch Seite 7

IDPlus 961-974 - HC
UNINTENDED EQUIPMENT OPERATION
• Use cables up to 10 m (32.80 ft) in length for the Input/Output terminals (probes and digital inputs).
• Use cables up to 3 m (9.84 ft) in length for TTL connection.
Failure to follow these instructions can result in equipment damage.
The NTC temperature probes do not feature any connection polarity and can be extended using normal bipolar
cable. Lengthening the probe wiring affects the electromagnetic compatibility (EMC) of the instrument.
UNINTENDED EQUIPMENT OPERATION DUE TO ELECTROSTATIC DISCHARGE
Before handling the equipment, always discharge the static electricity from the body by touching an earthed
surface or type-approved antistatic mat.
Failure to follow these instructions can result in equipment damage.
9IS54671.00 10 - 2018
NOTICE
NOTICE
www.eliwell.com
7/40