Eliwell EWPlus 902 Handbuch Seite 32

IDPlus 961-974 -HC
PAR. Description
tdC "Blast Chilling" duration.
dCC Defrost activation delay after a "Blast Chilling Cycle".
DEFROST (folder "dEF")
Type of defrost.
0 = electric defrost;
dty
1 = reverse cycle defrost;
2 = defrost independent of compressor.
dit Interval between the start of two consecutive defrost cycles.
Selects the count mode for the defrost interval.
0 = compressor running time;
dCt 1 = device running time;
2 = Every time the compressor stops, a defrost cycle is carried
out.
dOH Delay preceding start of first defrost after call.
dEt Defrost time-out; determines the maximum defrost duration.
dSt Defrost end temperature - determined by probe Pb2.
Determines whether or not the instrument must defrost at
dPO
power-up. n (0) = no; y (1) = yes.
FANS (folder "FAn")
FSt Fans disabling temperature.
FAd Fan activation differential.
Fdt Fan activation delay after a defrost cycle.
dt Dripping time.
9IS54671.00 10 - 2018
Range UM AP1 AP2 AP3 AP4
0...255 min 0
0...255 min 0
0/1/2 num 0
0...250 hours 6
0/1/2 num 1
0...59 min 0
1...250 min 30
-50.0...150 °C/°F 8.0
n/y flag n
-58.0...302 °C/°F 50.0 50.0 50.0 50.0
1.0...50.0 °C/°F 2.0
0...250 min 0
0...250 min 0
www.eliwell.com
0 0 0
0 0 0
0 0 1
6 6 6
1 1 1
0 0 0
30 30 30
8.0 8.0 8.0
n n n
2.0 2.0 2.0
0 0 0
0 0 0
32/40