Eliwell EWPlus 902 Handbuch Seite 25

IDPlus 961-974 - HC
PAR. Description
dCS "Blast Chilling" setpoint.
tdC "Blast Chilling" duration.
dCC Defrost activation delay after a "Blast Chilling Cycle".
DEFROST (folder "dEF")
dit Interval between the start of two consecutive defrost cycles.
Selects the count mode for the defrost interval.
0 = compressor running time;
dCt
1 = device running time;
2 = every time the compressor stops, a defrost cycle is carried
out.
dOH Delay preceding start of first defrost after call.
dEt Defrost timeout; determines the maximum defrost duration.
Determines whether or not the instrument must defrost at
dPO
power-up. n (0) = no; y (1) = yes.
ALARMS (folder "AL")
Can be used to select absolute (Att=0) or relative (Att=1)
Att
values for HAL and LAL parameters.
AFd Alarm differential.
HAL Maximum temperature alarm.
LAL Minimum temperature alarm.
PAO Alarm exclusion time on switching back on after power outage.
dAO Temperature alarm exclusion time after defrost.
OAO Alarm signaling delay after digital input disabling.
9IS54671.00 10 - 2018
Range UM AP1 AP2 AP3 AP4
-58.0...302 °C/°F 0.0
0...255 min 0
0...255 min 0
0...250 hours 6
0/1/2 num 1
0...59 min 0
1...250 min 1
n/y flag n
0/1 flag 0
1.0...50.0 °C/°F 2.0
LAL...302 °C/°F 150
-58.0...HAL °C/°F -50.0 -50.0 -50.0 -50.0
0...10 hours 0
0...999 min 0
0...10 hours 0
www.eliwell.com
0.0 0.0 0.0
0 0 0
0 0 0
0 0 8
1 1 1
0 0 0
1 1 30
n n n
0 0 0
2.0 2.0 2.0
150 150 50.0
0 0 0
0 0 0
0 0 0
25/40