Eliwell EWPlus 902 Handbuch Seite 35

IDPlus 961-974 - HC
PAR. Description
Device address: indicates the device address to the
dEA
management protocol.
Family address: indicates the device family to the
FAA
management protocol.
Modbus parity bit.
Pty
n (0) = none; E (1) = even; or (2) = odd.
StP Modbus stop bit. 1b (0) = 1 bit; 2b (1) = 2 bit.
DISPLAY (folder "diS")
Basic commands edit lock.
LOC It is still possible to access parameter programming and edit the
parameters. n (0) = no; y (1) = yes.
PAssword1: if PS1≠0 it is the password to the "User"
PS1
parameters.
PAssword2: if PS2 ≠ 0 it is the password to the "Installer"
PS2
parameters.
ndt Display with decimal point. n (0) = no; y (1) = yes.
CA1 Calibration 1. Temperature value to be added to the value of Pb1. -12.0...12.0 °C/°F 0.0
CA2 Calibration 3. Temperature value to be added to the value of Pb2. -12.0...12.0 °C/°F 0.0
CA3 Calibration 3. Temperature value to be added to the value of Pb3. -12.0...12.0 °C/°F 0.0
Display mode during defrost.
0 = displays the temperature read by probe Pb1;
ddL
1 = locks recorded value of Pb1 at defrost start;
2 = displays label "dEF".
Ldd Timeout value for display unlock - label dEF.
9IS54671.00 10 - 2018
Range UM AP1 AP2 AP3 AP4
0...14 num 0
0...14 num 0
n/E/o num n
1b - 2b flag 1b
n/y flag n
0...250 num 0
0...250 num 15
n/y flag y
0/1/2 num 0
0...255 min 30
www.eliwell.com
0 0 0
0 0 0
n n n
1b 1b 1b
n n n
0 0 0
15 15 15
y y y
0.0 0.0 0.0
0.0 0.0 0.0
0.0 0.0 0.0
0 0 0
30 30 30
35/40