Herunterladen Inhalt Inhalt Diese Seite drucken

Burgbad RL40 Montageanleitung Seite 32

Led-spiegelschrank
Vorschau ausblenden Andere Handbücher für RL40:
Inhaltsverzeichnis
GB
FAQS - QUESTIONS & ANSWERS
Questions
After a power failure, the light automatically switches on
even though you operate the light in „Normal mode" (not
room activation)?
You operate the mirror cabinet via room activation and
want to change and save the Basic room lighting mood?
You have purchased an additional module from the
RL40 series and would like to integrate it into the lighting
network?
PFLEGEHINWEISE / CARE INSTRUCTIONS / INTRUCTIONS D'ENTRETIEN
D
Die Badmöbel sind für eine lange Lebensdauer im Badezimmer konzipiert. Um langjährige Freude an unseren Qualitätsprodukten zu haben,
bitten wir Sie folgende Hinweise zu berücksichtigen:
1. Installation Duschabtrennung zwingend vorgeschrieben,
wenn die Möbel direkt an Wanne/Duschbereich anschließen
2. ausreichend lüften (Fenster, Lüftung)
3. überströmendes Wasser vermeiden, bzw. sofort beseitigen
Reinigung der Badmöbel, Spiegel und Glas ächen, Mineralguss und Keramik:
Zur schonenden Reinigung von Holz-, Kunststoff-, Lack- und Keramikober ächen empfehlen wir ein sauberes, weiches, feuchtes Tuch. (kein Mikro-
fasertuch!) Verschüttete Substanzen sollten sofort entfernt werden. Besonders hartnäckige Flecken (Fett, Kosmetik etc.) lassen sich ohne Rückstände
mit 1%iger Seifenlauge oder Feinspülmittel entfernen. Anschließend Fläche trocken reiben. Es ist darauf zu achten, dass an den Rändern und
Rückseiten keine Tropfenrückstände verbleiben. Grundsätzlich sind für die P ege von Hochglanzober ächen keine Scheuermittel und keine P ege-
mittel, die alkoholhaltige Stoffe beinhalten, zu verwenden.
Hochglanzober ächen härten nach dem Entfernen der Schutzfolie innerhalb von 3 Wochen vollständig aus. Bitte in diesem Zeitraum
besonders vorsichtig behandeln und nicht reinigen oder abwischen.
GB
The bathroom furniture is design for a long service life in the bathroom. We ask that you follow the instructions below to ensure that you can enjoy
our high quality products for many years:
1. The installation of a shower wall is essential if the furniture is installed directly next to the tub/shower area
2. Ensure suf cient ventilation (windows, ventilator)
3. Avoid or immediately mop up over owing water
Cleaning the bathroom furniture, mirrors and glass surfaces, mineral cast and ceramic:
We recommend a clean, soft, damp cloth (no micro ber cloth!) for gently cleaning wood, plastic, painted and ceramic surfaces. Particularly
stubborn stains (oils, cosmetics etc.) should be removed immediately. This can be done without residue using 1% soapy water or ne
washing-up liquid. Then rub the surface dry. Take care that no droplets of residue remain on the edges and backs. No scouring agents or care
products containing alcoholic substances should be used to clean high gloss surfaces.
High gloss surfaces are fully hardened within three weeks of the protective lm being removed. Please treat them with particular
care during this period and do not clean or wipe them.
32
Answers
... switch the lighting control to „Normal mode".
(see page: 27)
... follow the steps on page 28.
... pair the module according to the instructions on
page 24.
1.
2.
Symbols
3.
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

M1207

Inhaltsverzeichnis