Dismounting, Return And Disposal; Dismounting; Return; Disposal - WIKA Obsolete CPH65I0 Betriebsanleitung

Notes

8 Dismounting, return and disposal

GB
8.1

Dismounting

Only disconnect test- and calibration installations once the system has been depressurised!
8.2

Return

When returning the intrinsically safe hand-held pressure calibrator, use the original packaging or a
suitable transport package.
To avoid damage:
1. Wrap the CPH65I0 in an antistatic plastic film.
2. Place the CPH65I0, along with the shock-absorbent material, in the packaging. Place shock-
absorbent material evenly on all sides of the shipping box.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as transport of a highly sensitive measuring instrument.
Enclose the completed return form with the CPH65I0.
8.3

Disposal

Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally compatible way
and in accordance with the country-specific waste disposal regulations.
38
WARNING!
Residual media in dismounted intrinsically safe hand-held pressure calibrator can
result in a risk to persons, the environment and equipment. Take sufficient
precautionary measures.
WARNING!
Strictly observe when shipping the CPH65I0:
All instruments delivered to WIKA must be free from any kind of hazardous
substances (acids, bases, solutions, etc.).
The return form is available on the internet:
www.wika.de / Service / Return
WIKA Operating Instruction, Model CPH65I0