Maintenance, Cleaning And Servicing; Maintenance; Replacing Batteries - WIKA Obsolete CPH65I0 Betriebsanleitung

7 Maintenance, cleaning and servicing

7 Maintenance, cleaning and servicing
7.1

Maintenance

GB
This CPH65I0 intrinsically safe hand-held pressure calibrator is maintenance-free. Repairs must
only be carried out by the manufacturer, except for battery replacement.
7.2

Replacing batteries

Replace batteries as soon as the battery indicator turns on to avoid false measurements. If the
batteries discharge too deeply the CPH65I0 will automatically shut down to avoid battery leakage.
36
WARNING!
Use only approved AA size alkaline batteries as given in the table below.
Only change batteries in an area known to be non-hazardous.
Approved batteries
Battery manufacturer
(All batteries alkaline - AA 1.5 V)
Duracell
Rayovac
Energizer
Panasonic
*Model AM3 is replaced by model LR6XWA
Model
MN1500
815
E91
AM3*
WIKA Operating Instruction, Model CPH65I0