4 Design and Functions
4 Design and Function
4.1
Short description / Description
GB
The CPH65I0-S1/S2 intrinsically safe hand-held pressure calibrator is designed to be a simple to
use yet very versatile pressure calibrator. Its two internal pressure sensors combined with inputs
for mA, switch contacts and an RTD probe allow the CPH65I0-S1/S2 intrinsically safe hand-held
pressure calibrator to calibrate virtually any pressure device.
The CPH65I0-S1 intrinsically safe hand-held pressure calibrator is a single sensor pressure
calibrator; the CPH65I0-S2 intrinsically safe hand-held pressure calibrator is a dual sensor
pressure calibrator. The CPH65I0-S1 uses the P1 port for all pressure inputs. The P2 port is only
used on the CPH65I0-S2. Therefore on the CPH65I0-S1, all menu choices involving pressure are
limited to the P1 port only. All other CPH65I0-S1 features and functions are the same as for the
CPH65I0-S2.
4.2
Scope of delivery
CPH65I0-S1/S2 intrinsically safe hand-held pressure calibrator
■
Operating instructions
■
Test cable
■
Four AA alkaline batteries
■
1 x adapter 1/8 NPT male to G 1/2 B male per pressure connection
■
1 x Teflon tape
■
3.1 calibration certificate per DIN EN 10204
■
1)
Adapter not included in delivery for North America
Cross-check scope of delivery with delivery note.
14
1)
WIKA Operating Instruction, Model CPH65I0