Safety; Intended Use - WIKA Obsolete CPH65I0 Betriebsanleitung

2 Safety

2 Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate
CPH65I0 intrinsically safe hand-held pressure calibrator has been selected in terms
of measuring range, design and specific measuring conditions. Serious injuries
and/or damage can occur should these not be observed.
Further important safety instructions can be found in the individual chapters of these
operating instructions.
2.1

Intended use

The CPH65I0 intrinsically safe hand-held pressure calibrator can be used as a calibration
instrument and also for any application which requires accuracy pressure measurement.
The CPH65I0 intrinsically safe hand-held pressure calibrator has been designed and built solely for
the intended use described here, and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the CPH65I0 intrinsically safe hand-held pressure calibrator
outside of its technical specifications requires the instrument to be shut down immediately and
inspected by an authorised WIKA service engineer.
Handle electronic precision measuring instruments with the required care (protect from humidity,
impacts, strong magnetic fields, static electricity and extreme temperatures, do not insert any
objects into the instrument or its openings). Plugs and sockets must be protected from
contamination.
If the CPH65I0 intrinsically safe hand-held pressure calibrator is transported from a cold into a
warm environment, the formation of condensation may result in the instrument malfunctioning.
Before putting it back into operation, wait for the instrument temperature and the room temperature
to equalise.
The manufacturer shall not be liable for claims of any type based on operation contrary to the
intended use.
WIKA Operating Instruction, Model CPH65I0
GB
7