Recalibration; Dismounting, Return And Disposal; Dismounting; Return - WIKA CPH7650 Betriebsanleitung

8. Maintenance, cleaning ... / 9. Dismounting, return ...

8.3 Recalibration

DKD/DAkkS certificate - official certificates:
We recommend that the instrument is regularly recalibrated by the manufacturer, with
time intervals of approx. 12 months. The basic settings will be corrected if necessary.

9. Dismounting, return and disposal

Personnel: Skilled personnel

9.1 Dismounting

WARNING!
Physical injury
With the disassembly of the measurement setup, there is a danger from high
pressures.
▶
Disconnect test and calibration installations once the system has been
depressurised.

9.2 Return

Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.) and must therefore be cleaned before being returned.
WARNING!
Physical injuries and damage to property and the environment
through residual media
Residual media at the instrument can result in a risk to persons, the
environment and equipment.
▶
With hazardous substances, include the material safety data sheet for the
corresponding medium.
▶
Clean the instrument, see chapter 8.2 "Cleaning".
When returning the instrument, use the original packaging or a suitable transport
packaging.
Instruments with lithium-ion rechargeable or lithium-metal batteries
The lithium-ion batteries or lithium-metal batteries included are subject to the
requirements of the dangerous goods laws. Special requirements for packaging and
labelling must be observed when shipping. A dangerous goods expert must be consulted
when preparing the package.
WIKA operating instructions, model CPH7650
EN
65