Spare Parts - Wilo Stratos GIGA Betriebsanleitung

1
2
3
4
5
Fig. 55: Error type F, flowchart
6.0.0.0
E000
Fig. 56: Acknowledging error type E or F
12

Spare parts

Spare parts table
Installation and operating instructions Wilo-Stratos GIGA, GIGA-D, GIGA B
Error type F (Fig. 55):
Program step/query Contents
1
2
3
4
5
If type E or F errors occur, proceed as follows to acknowledge (Fig. 56):
• To change to the menu mode, press the operating button.
Menu number <6.0.0.0> flashes on the display.
12.3
• Press the operating button again.
Menu number <6.0.0.0> appears steady on the display.
The error is acknowledged, and the status page is displayed.
NOTICE:
The error will be acknowledged automatically if the cause of the error is
eliminated.
Spare parts may be ordered via a local specialist and/or Wilo customer
service.
Please provide all the information on the pump and drive rating plate
when ordering spare parts. This helps prevent return queries and
incorrect orders.
CAUTION! Risk of material damage!
Trouble-free pump operation can only be guaranteed when origi-
nal spare parts are used.
• Use only genuine Wilo spare parts.
• Each component is identified in the table below.
• Information to be provided when ordering spare parts:
• Spare part number
• Name/description of the spare part
• All data on the pump and drive rating plate
NOTICE:
For a list of genuine spare parts, see the Wilo spare parts documenta-
tion (www.wilo.com). The item numbers on the exploded view
drawing (Fig. 6) are intended as orientation and to provide a list of the
pump components (see „Spare parts table" on page 127). These item
numbers are not to be used to order spare parts.
For the allocation of assemblies, see Fig. 6.
No. Part
1.1 Impeller (set)
1.11
1.12
1.13
1.14
(11-22kW)
Error code is displayed
Error counter is incremented
Error criterion fulfilled?
Error acknowledged?
End; auto control resumes
Yes
No
Details
Nut
Lock washer
Impeller
O-ring
English
127