Wilo Stratos GIGA Betriebsanleitung Seite 98

English
8.5.2 Display menu mode
"One level down" menu element
"Information" menu element
"One level up" menu element
"Selection/setting" menu element
98
The electronic module functions can be called via the menu structure.
The menu contains sub-menus on several levels.
The current menu level can be changed using "One level up" or
"One level down" menu items, for example, to change from
menu <4.1.0.0> to <4.1.1.0>.
The menu structure is similar to the structure of the chapters and
sections in these operating instructions: chapter 8.5(.0.0) contains
subsections 8.5.1(.0) and 8.5.2(.0); in the electronic module, menu
<5.3.0.0> contains menu sub-items <5.3.1.0> to <5.3.3.0>, etc.
The currently selected menu element can be identified by the menu
number on the display and the associated symbol.
Within a menu level, menu numbers can be selected sequentially by
turning the operating button.
NOTICE:
If the operating button is not operated for 30 seconds at any position
in menu mode, the display returns to the status page.
Every menu level can contain four different element types:
The "One level down" menu element is indicated on the display by the
symbol shown here (arrow on the units display). If a "One level down"
menu element is selected, pressing the operating button causes a
change to the next menu level down. On the display, the new menu
level is indicated by a menu number that has increased by one digit as
a result of the change; for example, menu <4.1.0.0> changes to
menu <4.1.1.0>.
The "Information" menu element is indicated on the display by the
symbol shown here (standard symbol for "access disable"). If an
"Information" menu element is selected, pressing the operating but-
ton has no effect. When an "Information" menu element is selected,
current settings or measurements that cannot be changed by the user
are displayed.
The "One level up" menu element is indicated on the display by the
symbol shown here (arrow on the symbol display). If a "One level up"
menu element is selected, briefly pressing the operating button
causes a change to the next higher menu level. On the display, the
new menu level is indicated by the menu number. For example, when
returning from menu level <4.1.5.0>, the menu number jumps
to <4.1.0.0>.
NOTICE:
If the operating button is pressed for 2 seconds while a "One level up"
menu element is selected, the display jumps back to the status page.
±
The "Selection/setting" menu element does not have a special label
on the display, but is identified graphically in these instructions by the
adjacent symbol.
If a "Selection/setting" menu element is selected, pressing the oper-
ating button will change to edit mode. In edit mode, flashing values
can be changed by turning the operating button.
In some menus, acceptance of the input by pressing the operating
button will be confirmed by the brief display of the "OK" symbol.
WILO SE 03/2018