Emptying The C/L Container - Amann Girrbach ceramill motion 2 Betriebsanleitung

H A N D L I N G T H E C O O L A N T / L U B R I C A N T ( C / L )
NOTE:
Do not damage the drain cock!
E N
▷ Move the C/L container only by its handles!
▷ Carefully lift the C/L container [2] out of the
supply unit.
Fig. 27
1 Ceramill Coolstream
2 C/L container
78
8.3

Emptying the C/L Container

NOTE:
Do not damage the drain cock!
▷ Move the C/L container only by its handles!
▷ Place the C/L container [1] with its rear side fac-
ing frontward on a table or, i.e. on the Ceramill
1
Coolstream.
2
Fig. 28
1 C/L container
2 Drain cock
3 Disposal receptacle
▷ Position a disposal receptacle [3] below drain
cock [2].
▷ If required, mount a hose to the drain cock and
conduct it into the disposal receptacle.
1
2
3