Machine Specifications; Delivery Scope; Ceramill Motion 2 - Amann Girrbach ceramill motion 2 Betriebsanleitung

4

Machine Specifications

4.1

Ceramill Motion 2

The Ceramill Motion 2 is available as four-
axis model (4X) and as five-axis model
(5X). These Operating Instructions apply
for both models.
4.1.1

Delivery Scope

_ Ceramill Motion 2 milling and grinding machine
_ Mains cable
_ USB cable (5 m)
_ Network cable (5 m)
_ Control cable, extraction
_ Compressed-air hoses (250 mm and 2000 mm)
_ Cleaning hose with brush head
_ Service unit
_ Service set for Jäger spindle
_ Ceramill-Match-Package
▪ Ceramill Match 2 CD (Ceramill Match 2 and
Ceramill Motion 2 operating software)
▪ User Manual
_ Blank template, ZI71 Motion
_ Ceramill TEST 71 L (test blank)
_ Ceramill Motion Roto 2.5 (milling tool mounted
in collet)
_ Screw set
_ Torque wrench, 4 Nm
_ Blank holder 71
_ Extraction adapter
_ Extraction hood
_ Drain cover
_ Caliper
M A C H I N E S P E C I F I C A T I O N S
The Ceramill Motion is delivered with a Ceramill
TEST 71 L test blank (Order No. 760301) inserted
in the blank holder. Prior to delivery, a test object
was factory-milled in order to check the zero point
settings. Possibly remaining milled shavings/chips
are not a reason for rejection. The test blank is
provided for test milling and calibration of the
Ceramill Motion.
▷ After unpacking, check the machine for com-
pleteness and possible transport damages.
Please claim any transport damages immedi-
ately with your supplier (compare with Ceramill
Mall setup checklist).
E N
49