General Safety Instructions; Suitable Personnel - Amann Girrbach ceramill motion 2 Betriebsanleitung

G E N E R A L S A F E T Y I N S T R U C T I O N S
2 General Safety Instruc-
tions
E N
When installing, starting-up and operating the
machine, always observe the following safety
instructions:
CAUTION:
A defective machine can lead to malfunctions!
On detection of damage or a functional defect of
the machine:
▷ Label the machine as defective.
▷ Prevent further operation until the machine
has been repaired.
NOTE:
Possible machine damage through insufficient
extraction during dry processing!
▷ Operate the machine only with Ceramill Air-
stream or another compatible extraction sys-
tem (see page 63).
NOTE:
Possible machine damage through insufficient
cooling during grinding operations!
▷ For grinding operations, operate the machine
only with Ceramill Coolstream (see page 54ff).
NOTE:
Damage through escaping coolant/lubricant!
▷ Regularly check the coolant/lubricant connec-
tions for tightness against leaks.
48
NOTE:
▷ Switch the machine off when not in use or
unsupervised for longer periods, e.g., over-
night. This method of saving electrical energy
also benefits the environment.
3

Suitable Personnel

NOTE:
Starting-up and operation of the machine may
only be carried out by trained specialised per-
sonnel.