Turn Indicators; Tail Light; Replacing The Plate Number Light; Battery - Beta Motorcycles ALP 200 Bedienungsanleitung

4

TURN INDICATORS

To reach the bulb, remove the glass cover
by loosening screw A.
Remove the bulb from the connectors and
carry out replacement.
A

TAIL LIGHT

Keep the headlight glass clean at all times
(see page 53).
The LED tail light is sealed. In the case of
burnout of one or more LEDs it is necessary
to replace the entire group.
To replace, contact authorised Betamotor
customer service.
REPLACING THE PLATE
NUMBER LIGHT
Keep the tail light glass clean at all times
(see page 53).
• Loosen the screw 1
1
2
• Remove the glass 2
• Remove the bulb from the connectors and
carry out replacement

BATTERY

Battery is located under the saddle and
requires no maintenance.
Keep the battery terminals clean. If neces-
sary, protect them with a thin film of acid-
free grease.
GB
49