Rear Tail Light; Turn Indicators - Beta Motorcycles EVO 2T EUROPA Handbuch

4
To replace the daylight bulb, proceed as
follows.
4
Pull the whole bulb holder 4.
Take the bulb and remove it from the bulb
holder.
Replace the bulb.
To reassemble the bulb and bulb holder,
proceed in reverse order with respect to
disassembly.
To replace the headlight group proceed
in reverse order with respect to the above
instructions paying attention to the instru-
ment and regulator support fixing devices.

REAR TAIL LIGHT

Keep the tail light glass clean at all times
(see page 61).
The LED tail light is sealed. In the case of
burnout of one or more LEDs it is necessary
to replace the entire group.
To replace, contact authorised Betamotor
customer service.

TURN INDICATORS

To reach the bulb, remove the glass cover
by loosening screw 1.
Remove the bulb from the connectors and
carry out replacement.
1
GB
60