3
KEY TO SYMBOLS
Tightening torque
BRAKES
FRONT BRAKE
The front brake is disk type with hydraulic
control.
Use the adjusting nut 1 to vary the inter-
vention point.
WARNING: reduced play causes brake
overheating leading to sudden lockup.
1
ADJUSTMENT OF GAS CLEARANCE
The throttle control cable should always
have a 3-5 mm play. In addition, the idle
speed should not change when the han-
dlebars are fully rotated to the left or right.
Push back protective cap 1. Loosen
counternut 2 and turn adjusting screw 3.
1
Tighten the counternut and check that the
3
2
throttle twist grip turns smoothly.
GB
32