Tyres; Fork Oil - Beta Motorcycles ALP 200 Bedienungsanleitung

4

TYRES

Only fit tyres approved by BETAMOTOR.
Unsuitable tyres can adversely affect the road holding of the vehicle.
• To protect your safety, immediately replace any damaged tyres.
• Slick tyres adversely affect the road holding of the vehicle, especially on wet roads
and in off-road riding.
• Insufficient pressure results in abnormal wear and overheating of the tyres.
• The front and rear tyres must have the same tread design.
• Always measure the inflating pressures when the tyres are cold.
• Keep the tyre pressures within the prescribed range.
GB
2
1
20Nm

FORK OIL

The procedure for changing the oil in
the forks is provided only for information.
We recommend having the operation
performed by a BETAMOTOR authorized
workshop.
Follow these steps to renew the oil:
- Position the vehicle on the central bike
stand.
- Loosen the screws 1.
- Remove the lower plug and upper plug
2.
- Let all the oil drain from the rod.
- Fit and tighten the lower plug.
- Pour in the quantity of liquid indicated on
page 11.
- Fit and tighten upper plug 2.
- Tighten the screws 1 to the specified
torque values.
46