Safety; Intended Use - WIKA CPU6000-W Betriebsanleitung

2. Safety

2. Safety
WARNING!
EN
Before installation, commissioning and operation, ensure that the
appropriate CalibratorUnit has been selected in terms of measuring range,
design and specific measuring conditions.
Non-observance can result in serious injury and/or damage to the
equipment.
Further important safety instructions can be found in the individual
chapters of these operating instructions.
2.1

Intended use

The CPU6000 series is made up of three instruments: the model CPU6000-W
weather station, the model CPU6000-S pressure balance sensor box and the model
CPU6000-M digital multimeter. All of these products serve for the acquisition of
measured value data, relevant for calibration certificates. The new calibration concept
simplifies the generation of certificates and increases the productivity and quality of the
certificate generation process.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be
observed. Improper handling or operation of the instrument outside of its techni-
cal specifications requires the instrument to be taken out of service immediately and
inspected by an authorised WIKA service engineer.
Handle electronic precision measuring instruments with the required care (protect from
humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,
do not insert any objects into the instrument or its openings). Plugs and sockets must be
protected from contamination.
If the instrument is transported from a cold into a warm environment, the formation of
condensation may result in instrument malfunction. Before putting it back into operation,
wait for the instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.
6 WIKA operating instructions CalibratorUnit, model CPU6000