4 Design and Function
4 Design and Function
4.1
Short description / Description
The CPG500 is a digital pressure gauge featuring a Min/Max display function. Full scale (FS)
accuracy is ± 0.25% based on the upper limit of the measurement range.
Dynamic pressure peaks are measured at a sampling rate of 10 ms (100 measurement
values/second). The MIN/Max memory is continuously updated and rewritten.
4.2
Scope of delivery
Cross-check scope of delivery with delivery note
■
Batteries are installed ex works
■
4.3
Functions and keys
4½-digit LCD-Display with backlight
■
Displays measurement values and menu functions
■
Actual value display
Battery status
Description
Display
Graphic indication of the actual pressure.
Bar graph
A pressure peak is indicated by means of a pixel (graduation mark).
The indicated value is refreshed at intervals of 50 ms (20 measurements/s).
Indicates the actual pressure.
ACT
The indicated value is refreshed at intervals of 300 ms (3 times/s).
Indicates the MIN, MAX or FS value according to setting.
MIN/MAX
The indicated value is refreshed at intervals of 300 ms (3 times/s).
FS
Upper limit of the scale (e.g. 700 bar).
Units
Indicates the chosen unit.
Battery
Indicates the battery status (5 segments).
WIKA Operating Instruction, Model CPG500
Bargraph with Peak & Hold Funktion
MIN/MAX or FullScale (FS)
GB
9