Correct Position In The Vehicle - CYBEX SOLUTION Z-FIX Bedienungsanleitung

12

CORRECT POSITION IN THE VEHICLE

The car seat with retracted ISOFIX Connect system can be
used on all vehicle seats with automatic three-point safety
belts approved in the vehicle manual for ‚universal' use. A
'semi-universal' certification is given to restraint systems that
are connected to the car through ISOFIX Connect.
For this reason, ISOFIX Connect can only be used in certain
vehicles. Please refer to the enclosed vehicle type list for
approved vehicles. You can obtain the most up-to-date
version from www.cybex-online.com.
In exceptional cases, the car seat may also be used on the
front passenger seat. Please note the following in this case:
• In cars with airbags, you should push the passenger seat
back as far as possible. When doing so, however, ensure
that the upper belt point of the safety belt is behind the belt
feed point of the car seat.
• Always comply with the recommendations of the vehicle
!
manufacturer.
WARNING! The car seat is not suitable for use with a
two-point or lap belt. If the seat is secured using a two-
point belt, an accident may result in severe or even fatal
injuries to the child.