Intended Use; Environmental Conditions; Service Life; Explanation Of Warning Symbols - Ottobock 1M10 Adjust Gebrauchsanweisung

2 Intended use

2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate components based upon weight
and mobility grades identifiable by our MOBIS classification information and which have appro­
priate modular connectors.
The product is recommended for mobility grade 1 (indoor walker) and mobility
grade 2 (restricted outdoor walker).
m°
kg
Size [cm]
Stiffness 1
Stiffness 2
Stiffness 3

2.3 Environmental conditions

Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)
Other environmental conditions
UV light
Hydrolysis

2.4 Service life

This product has been tested by the manufacturer with 2 million load cycles according to ISO
22675. Depending on the patient's activity level, this corresponds to a service life of 2 to 3 years.
3 Safety

3.1 Explanation of warning symbols

Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE

3.2 General safety instructions

CAUTION
Exceeding the service life and reuse on another patient
Risk of injury due to loss of functionality as well as damage to the product
10
Maximum body weight
22 to 23 24 to 25
52 kg 58 kg
68 kg 76 kg
80 kg 100 kg
Not resistant
Not resistant
26 to 27 28 to 30
72 kg 77 kg
95 kg 100 kg
125 kg 125 kg